Page updated · Independent public directory · Data checked between October 1, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Butte County, CA Water Testing: $28

Public test

Butte County Public Health Laboratory Water Testing

Butte County Public Health Laboratory (BCPHL)

Wells only.

Misses nitrate, arsenic, lead.

Pick up sterile water collection bottles from BCPHL or the Environmental Health Division, collect your well water sample following the posted procedure, and deliver it to the Butte County Public Health Laboratory with the completed water submittal form and $28 fee.

Address:
  • Butte County Environmental Health Division, 202 Mira Loma Drive, Oroville.

Call 530-891-2747.

Call 530-552-3880.

Order a test

If your results show a problem

None of the filters we link is certified for nitrate. Look for a reverse osmosis unit certified to NSF/ANSI 58 for nitrate, and check the certifier's own listing for that model.

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Butte County Public Health Laboratory Water Testing is at Butte County Public Health Laboratory, 695 Oleander Avenue, Chico. Samples accepted Monday through Thursday from 8:30 a.m. to 4:30 p.m., with a lunch closure from 12:00 to 1:00 p.m.

Butte County Public Health Laboratory Water Testing posts $28.

Butte County Public Health Laboratory Water Testing tests for Bacteria, Fecal coliform, E. coli.

Butte County's public health lab does drinking water potability testing for households on private wells, and the service is residential only.

The county's 88 public water systems include 24 with a health-based violation.

Source: Water Sampling - Butte County Public Health, Environmental Health

Source: Butte County Public Health Laboratory

Records

Private wells supplied 38,152 people in 2015, 17 percent of the county's 225,411 residents. Systems with a health-based violation served 3,481 people. The CDC counted 180 people on community systems with average arsenic above 10 ug/L in 2022.

Facts

EPA radon zone 3. How this zone is counted.

From October 17, 2021 to October 17, 2026, health-based violations include other rules 24, nitrate 1, and coliform 1.

Notes

The county lab runs the Colilert test, which flags total coliforms and E. coli.

The county lab states plainly that it does not hold California ELAP certification, which matters when a result has to satisfy a lender or an agency.

Source: Butte County Public Health Laboratory

Butte County Environmental Health tells well owners to test for bacteria twice a year, with longer cycles for organics, nitrate and metals.

Source: Butte County Environmental Health

PFAS

Of 7 public water systems in this aggregation, 4 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.0225 µg/L of PFOS, perfluorooctanesulfonic acid, or 22.5 ng/L. It is not an average or a current tap reading.

This aggregation has 2 PFOA and 17 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

More

California tests

Sources

Method. Results. Filters. Bill.