Page updated · Independent public directory · Last reviewed November 16, 2026 · Not a government agency · By Bill Dahlstrom

Chlorine in Tap Water: Why It Smells and What Removes Taste

Cities add chlorine to kill germs. If your water smells like bleach, the Minnesota Department of Health says an uncovered pitcher in the fridge or a carbon filter cuts the taste and smell. Try the free pitcher step first.

Why your city adds chlorine

Chlorine kills germs in the water supply. EPA says, "In many cases, water needs to be disinfected to inactivate (or kill) these microbial pathogens." (EPA) The Minnesota Department of Health adds, "Chlorine is effective and continues to keep the water safe as it travels from the treatment plant to the consumer's tap." (MDH)

How much chlorine EPA allows

EPA's maximum residual disinfectant level for chlorine and for chloramine in tap water is 4.0 mg/L, measured as Cl2. The same table lists chlorine dioxide at 0.8 mg/L. For people who drink water above the chlorine and chloramine level for a long time, EPA names eye and nose irritation and stomach discomfort. For chloramine it also names anemia. (EPA)

Disinfectant can react with material already in the water. EPA's Stage 1 and Stage 2 rules name the byproducts: trihalomethanes, haloacetic acids, chlorite, and bromate. The national primary table sets haloacetic acids (HAA5) at 0.060 mg/L and total trihalomethanes (TTHMs) at 0.080 mg/L. EPA's health line for HAA5 is an increased risk of cancer. For TTHMs it is liver, kidney, or central nervous system problems, and an increased risk of cancer. (EPA disinfection byproduct rules, EPA limits)

If your city uses chloramine

Some cities use chloramine instead of chlorine alone. The Minnesota Department of Health says chloramines may form lower levels of the regulated byproducts than chlorine. Depending on the source water, they can also form other byproducts and raise the chance of nitrate formation and corrosion in the pipes that carry water through town. (MDH)

If it tastes or smells like bleach

The Minnesota Department of Health suggests these steps, starting with the free ones. (MDH)

  • Keep a pitcher of water in the fridge, uncovered, for a few hours.
  • Drink cold water. It has fewer taste and smell concerns.
  • Use a filter. "Most common point-of-use filters (e.g. pitcher filters) will remove chlorine taste and smell." So will granular activated carbon filters, at the tap or for the whole house.
  • Keep any filter maintained. MDH warns unmaintained units can make water quality worse.

If the smell is new, or you are on a well, why tap water smells like bleach walks through each cause and how to check it.

City water

Your water report

Start with the yearly report. "EPA requires community water systems to deliver a Consumer Confidence Report, also known as an annual drinking water quality report, to their customers." EPA adds, "You can either call your local water supplier or you may also find your report using EPA's CCR search tool." (EPA) Open EPA's Find Your Local CCR and look for your utility's name from the water bill.

EPA lists what the report must include. Three lines to look for:

  • "The lake, river, aquifer, or other source of the drinking water;"
  • "The regulated contaminant found in local drinking water;"
  • "The potential health effects of any contaminant detected in violation of an EPA health standard;" (EPA)

Our guide explains the report's table and limits.

Your home's pipes

The report covers the water your utility sends, and your own tap can differ. EPA says, "In homes with lead pipes that connect the home to the water main, also known as lead services lines, these pipes are typically the most significant source of lead in the water." It also says, "Lead can enter drinking water when plumbing materials that contain lead corrode, especially where the water has high acidity or low mineral content that corrodes pipes and fixtures." (EPA) Learn how to check for lead pipes.

Lab tests for city water

The small commission from purchases made through these links helps keep this free public directory open, at no extra cost to you.

Tap Score lead and copper water test kit

Tap Score Lead and Copper Water Test

$55

  • Lead
  • Copper

Order the kit(affiliate link)

Tap Score essential city water test kit

Tap Score Essential City Water Test

$189

  • 49 contaminants
  • Lead
  • Metals

Order the kit(affiliate link)

Mail-in lab test. Tap Score says: "Every lab facility in our network is certified with accreditations ranging from ISO to NELAC/ELAP, Direct State, DoD, DoE, DoH and beyond."

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Prices checked November 14, 2026.

Before you buy a filter, compare home fixes to see what each type removes. If you want to know what else is in your water, find a water test near you. Many cities also add fluoride to their water. Read about fluoride in tap water.

Chlorine sources checked October 10, 2026. City water lines checked October 24, 2026.