Lead Water Test Results: What Your Number Means
EPA's action level for lead is 15 ppb (0.015 mg/L), and it drops to 10 ppb on November 1, 2027, but EPA's health goal for lead is zero, so any lead in your tap is worth lowering.12 If your number is high, use only cold water for drinking, cooking, and baby formula, through a filter certified to NSF/ANSI 53 for lead or from a bottle; boiling does not remove lead, and bathing and showering are safe because skin does not absorb it.
This week, run the tap before you drink, put a certified filter on the kitchen faucet, and ask your water utility whether a lead pipe serves your home. Replacing that pipe or the old plumbing is the lasting fix.
Common results
| Result | What it means |
|---|---|
| ND or <1 ppb | No lead found at the lab's reporting limit. Retest if your plumbing changes or a lead line is dug up nearby. |
| 0.003 mg/L (3 ppb) | Under the 15 ppb action level. Some lead is reaching the tap, and EPA's goal is zero, so cold water and flushing still make sense. |
| 12 ppb | Under today's 15 ppb, but over the 10 ppb level water systems must meet from November 1, 2027.1 Use a certified filter for drinking and cooking. |
| 0.015 mg/L (15 ppb) | At the action level. Treat it as high: filter or bottled water for drinking, cooking, and formula, and ask your utility about a lead service line. |
| 40 ppb | Well over the action level. Stop drinking unfiltered tap water, use bottled or certified-filtered water for formula, and ask your child's doctor about a blood test. |
Example numbers. 1 mg/L = 1,000 ppb. EPA limit for public water systems, shown for reference. Private wells are not regulated.
What the limit is
The action level is not a safe line for one home. It is a trigger for a whole water system: "If more than 10% of tap water samples exceed the action level, water systems must take additional steps."1 For your own tap, the health goal of zero is the better guide.
Today
- "Use only cold water for drinking, cooking and making baby formula. Remember, boiling water does not remove lead from water."3
- "Let the water run for at least 1 minute before using it for drinking or cooking if the water has not been turned on in over six hours."4 On a lead service line, Minnesota says it can take 3 to 5 minutes.
- "Bathing and showering should be safe for you and your children, even if the water contains lead over EPA's action level. Human skin does not absorb lead in water."3
This week
- A filter. CDC says to drink and cook with water from a point-of-use filter certified by an independent tester. "This certification should indicate NSF/ANSI standard 53 for lead removal and NSF/ANSI standard 42 for particulate removal."2
- Your utility. "Ask your water provider if there is a lead service line providing water to your home."2 Lead pipes explains how to check, and lead pipe replacement programs lists cities that help pay.
- Your children. "A family doctor or pediatrician can perform a blood test for lead and provide information about the health effects of lead."3
Fixes
A certified filter lowers lead at the tap you drink from. The lead itself comes from pipes, solder, and fixtures, so replacing a lead service line or old plumbing removes the source. Keep filtering during and after that work: "Individual risks to lead exposure increases while the work is ongoing and for up to six months after the work is completed."2
The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

If your test shows lead, this is the under-sink system our results checker links. Under-sink reverse osmosis. Waterdrop G3P600 (affiliate link). Waterdrop says "8-stage reverse osmosis system designed to reduce a wide range of common contaminants, including dissolved solids, heavy metals, chlorine, and other impurities for everyday drinking water." It is certified for lead under NSF/ANSI 58 (IAPMO R&T listing WC-13976, checked November 14, 2026).
Some cities give free filters or help pay for a new line. See help paying for water treatment.
On a private well
"Lead is not usually found in well water. Lead may enter your drinking water as it travels from your well through your plumbing system."4 Minnesota says wells, pipes, solder, and fixtures built before 1995 may have parts with lead in them, so the same steps apply: cold water, run the tap, and a certified filter.
New to lab reports? How to read a water test report covers ppb, ND, and the rest. Another number on your report? Check it in the results checker.
Sources
- EPA, National Primary Drinking Water Regulations
- CDC, About Lead in Drinking Water
- EPA, Basic Information about Lead in Drinking Water
- Minnesota Department of Health, Lead in Drinking Water
Checked November 15, 2026.
