Page updated · Independent public directory · Data checked between October 2, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Washington County, MN Water Testing: $50

Public test

Washington County Public Health and Environment Well Water Testing

Wells only.

Private well owners in Washington County, Minnesota.

Order a test kit online through the county's Formstack order form or by calling Public Health and Environment, collect the sample, then bring it to the Government Center in Stillwater on Tuesdays between 8:15 and 10:30 a.m. with payment by cash or check.

All posted prices. Standard Drinking Water Test (Coliform Bacteria and Nitrate) $50, Coliform Bacteria $25, Nitrate $25, Arsenic $39, Lead $39, Manganese $39, Fluoride $39, Hardness $57, Iron $39, Iron Bacteria $77, Sodium $39, Sulfate $39

Call 651-430-6655.

Order a test

If your results show a problem

None of the filters we link is certified for nitrate. Look for a reverse osmosis unit certified to NSF/ANSI 58 for nitrate, and check the certifier's own listing for that model.

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Washington County Public Health and Environment Well Water Testing is at Washington County Government Center, 14949 62nd Street North, Stillwater. Office Hours Monday-Friday 8 a.m.-4:30 p.m.

Washington County Public Health and Environment Well Water Testing posts $50, other prices posted.

Washington County Public Health and Environment Well Water Testing tests for Bacteria, Nitrate, Arsenic, Lead, Manganese, Fluoride, Hardness, Iron, Sodium, Sulfate.

The Baytown TCE Plume and 3M / East Metro PFAS Plume are the two main sources of groundwater contamination in Washington County.

Source: Washington County, MN: Water Tests

Source: Minnesota Pollution Control Agency

For a radon test, our sister site says: Washington County offers free short-term radon kits to residents at listed service centers and environmental centers.

Records

In 2015, private wells supplied 47,417 people, 19 percent of the county's 251,597 residents. Systems with a health-based violation served 195 people. Of private well samples tested from 2014 to 2015, 15 percent were at or above the limit for nitrate. In the three years ending July 9, 2026, 15 of the county's 195 public water systems had a violation of some kind.

Wells

Washington well samples
Nitrate15 percent of samples, 441 samples, highest 23.7 mg/L, average 3.7 mg/Lnitrate-N Health Risk Limit of 10 mg/L

Minnesota nitrate reports, 2014 to 2015.

These are results from wells that were tested, not a prediction for your well. The only way to know what is in your water is to test it.

How these samples were counted.

Notes

The Minnesota Department of Health says East Metro PFAS sites include the 3M Cottage Grove manufacturing facility and large waste disposal facilities where PFAS-bearing wastes were disposed.

Source: Minnesota Department of Health

The Baytown TCE Plume is a 5-mile long trichloroethylene (TCE) plume that extends from its source area in Lake Elmo through Baytown and West Lakeland Townships and the City of Bayport to the St. Croix River.

Source: Minnesota Pollution Control Agency

In most of Dakota, eastern Washington, and parts of Hennepin and Ramsey Counties, the uppermost bedrock aquifer is the Prairie du Chien-Jordan.

Source: U.S. Geological Survey

Facts

Health-based violations from October 17, 2021 to October 17, 2026 include nitrate 1 and coliform 1.

Radon zone 1.

PFAS

Of 12 public water systems in this aggregation, 11 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 1.7 µg/L of PFBA, perfluorobutanoic acid, or 1700 ng/L. It is not an average or a current tap reading.

This aggregation has 23 PFOA and 6 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

Minnesota tests

Sources

Method. Results. Filters. Bill.