Page updated · Independent public directory · Data checked between October 2, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Franklin County, MO Water Testing: Bacteria

Public test

Franklin County Health Department Private Well Water Testing

Wells only.

Misses nitrate, arsenic, lead.

Private well owners in Franklin County, Missouri.

Water sample test kits are available from the Franklin County Health Department; an Environmental Public Health Specialist will inspect a private well for sanitation defects upon request from the owner.

Call 636-583-7300.

Official page

If your results show a problem

None of the filters we link is certified for nitrate. Look for a reverse osmosis unit certified to NSF/ANSI 58 for nitrate, and check the certifier's own listing for that model.

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Franklin County Health Department Private Well Water Testing is at Franklin County Health Department, 414 E Main St., Union. Monday through Friday 8 am to 4:30 pm.

Franklin County Health Department Private Well Water Testing tests here but posts no price.

Franklin County Health Department Private Well Water Testing tests for Bacteria.

The Franklin County Health Department hands out water sample test kits for coliform and other bacteria in a private water supply.

Source: Franklin County Health Department

Records

In 2015, private wells supplied 40,586 people, 40 percent of the county's 102,426 residents. Systems with a health-based violation served 2,348 people. The CDC counted 62,793 people on community systems with average nitrate at or below 10 mg/L in 2022. In the three years ending July 9, 2026, 51 of the county's 83 public water systems had a violation of some kind.

Notes

Facts

Health-based violations from October 17, 2021 to October 17, 2026 include coliform 11, other rules 4, and nitrate 1.

Radon zone 2.

PFAS

Of 8 public water systems in this aggregation, 2 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.0073 µg/L of PFHxS, perfluorohexanesulfonic acid, or 7.3 ng/L. It is not an average or a current tap reading.

This aggregation has 0 PFOA and 2 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

More

Missouri tests

Sources

Method. Results. Filters. Bill.