Page updated · Independent public directory · Data checked between October 9, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Alamance County, NC Water Testing: $65

Public test

Alamance County Well Water Testing

Wells only.

We can only collect water samples from drinking water wells with a properly functioning well pump.

Environmental Health Specialists come to your property to collect the sample, then ship it to a North Carolina certified laboratory.

All posted prices. Coliform Bacteria $65, Inorganic Chemical Water Sample $110, Volatile Organic Compounds $125, Pesticides $125, Nitrate/Nitrite $70, Full Inorganic Panel $135

Call 336-570-6367.

Official page

If your results show a problem

Waterdrop WHF21-FG whole house water filter

Waterdrop WHF21-FG

If your test finds iron or manganese, this is the whole-house filter we link.

Whole-house filtered water for your family, at every tap.

Waterdrop rates it to reduce iron and manganese.

The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

See the Waterdrop WHF21-FG (affiliate link)

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Alamance County Well Water Testing is at Alamance County Environmental Health, 1946 Martin St., Burlington. Monday - Friday 8am - 5pm.

Alamance County Well Water Testing posts $65, other prices posted.

Alamance County Well Water Testing tests for Bacteria, Inorganic chemicals, Volatile organic compounds, Pesticides, Nitrate.

During the calendar year 2025, the City of Burlington delivered an average of 12.922 million gallons of water per day through approximately 439.69 miles of water lines.

Source: Types of Water Samples, Alamance County Environmental Health

Source: City of Burlington

Wells

Alamance well samples
Nitrate0 percent of samples10,000 µg/L (MCL/SMCL)
Arsenic0.16 percent of samples10 µg/L (MCL/SMCL)
Lead2.66 percent of samples15 µg/L (MCL/SMCL)
Manganese31.74 percent of samples50 µg/L (MCL/SMCL)
Iron28.66 percent of samples300 µg/L (MCL/SMCL)

NC well contaminants, 1998 to 2010.

These are results from wells that were tested, not a prediction for your well. The only way to know what is in your water is to test it.

How these samples were counted.

Notes

Burlington's 2025 drinking-water report says the city uses two surface sources, and that Lake Mackintosh is in southwest Alamance County and southeast Guilford County.

Burlington's source susceptibility table, dated September 2020, rates Lake Mackintosh Higher and Stoney Creek Reservoir Moderate.

Stoney Creek Reservoir is near the Hopedale Community. It supplies the Ed Thomas Water Treatment Plant in downtown Burlington.

Source: City of Burlington

Records

In 2015, private wells supplied 49,917 people, 32 percent of the county's 158,276 residents. Of the county's 101 public water systems, 2 had a health-based violation.

Facts

Radon zone 3.

PFAS

Of 5 public water systems in this aggregation, 4 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.017 µg/L of PFOS, perfluorooctanesulfonic acid, or 17 ng/L. It is not an average or a current tap reading.

This aggregation has 14 PFOA and 19 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

North Carolina tests

Sources

Method. Results. Filters. Bill.