Page updated · Independent public directory · Data checked between October 2, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Catawba County, NC Water Testing: $100

Public test

Catawba County Environmental Health Private Well Water Samples

Wells only.

Misses arsenic.

Catawba County property owners with private wells; samples are obtained through Catawba County Environmental Health after an application and fee are submitted through the county's online application system.

Submit a water sample application and pay the applicable fee through the county's online application system; samples are collected Monday through Thursday, with bacteriological results back in 4-5 days and chemical results in 3-4 weeks.

All posted prices. Water Samples (per sample): Bacteriological $100.00; Fluoride, Lead, Nitrite/Nitrate, Pesticide, Petroleum $150.00 each; Inorganic $128.00.

Call (828) 465-8200.

Order a test

If your results show a problem

Waterdrop WHF21-FG whole house water filter

Waterdrop WHF21-FG

If your test finds iron or manganese, this is the whole-house filter we link.

Whole-house filtered water for your family, at every tap.

Waterdrop rates it to reduce iron and manganese.

The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

See the Waterdrop WHF21-FG (affiliate link)

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Catawba County Environmental Health Private Well Water Samples is at Catawba County Environmental Health, 25 Government Drive, Newton.

Catawba County Environmental Health Private Well Water Samples posts $100, other prices posted.

Catawba County Environmental Health Private Well Water Samples tests for Bacteria, Fluoride, Lead, Nitrate, Pesticide, Petroleum.

Catawba County says drilled wells may have excessive iron, iron sulfide, manganese, magnesium, and calcium, and that only filtration removes those minerals.

Testing from 1998 to 2010 found 23.47 percent of private well samples at or above the limit for iron.

Source: Catawba County Environmental Health

Wells

Catawba well samples
Nitrate0 percent of samples10,000 µg/L (MCL/SMCL)
Arsenic1.95 percent of samples10 µg/L (MCL/SMCL)
Lead2.22 percent of samples15 µg/L (MCL/SMCL)
Manganese17.74 percent of samples50 µg/L (MCL/SMCL)
Iron23.47 percent of samples300 µg/L (MCL/SMCL)

NC well contaminants, 1998 to 2010.

These are results from wells that were tested, not a prediction for your well. The only way to know what is in your water is to test it.

How these samples were counted.

Notes

Hickory's drinking water, which also supplies southeastern Catawba County, is surface water from Lake Hickory on the Catawba River.

Source: City of Hickory Public Utilities

Records

In 2015, private wells supplied 45,129 people, 29 percent of the county's 155,056 residents. In the three years ending July 9, 2026, 58 of the county's 148 public water systems had a violation of some kind.

Facts

EPA radon zone 2. How this zone is counted.

PFAS

Of 7 public water systems in this aggregation, 2 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.0119 µg/L of PFOA, perfluorooctanoic acid, or 11.9 ng/L. It is not an average or a current tap reading.

This aggregation has 1 PFOA and 0 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

North Carolina tests

Sources

Method. Results. Filters. Bill.