Page updated · Independent public directory · Data checked between October 2, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Wayne County, NC Water Testing: $75

Public test

Wayne County Environmental Health Department Private Water Supply Testing

Wells only.

Owners of an existing private water supply well in Wayne County, North Carolina.

Contact Wayne County Environmental Health Department (134 N John Street, 3rd Floor, Goldsboro, NC; 919-731-1174) to arrange a water sample; samples are sent to the North Carolina State Laboratory of Public Health in Raleigh for analysis.

All posted prices. Total Coliform (Bacteriological) $75, Inorganic Panel (Metals, Anions, NO2/NO3) $120, Inorganic Panel (Metals, Anions) $95, Nitrate/Nitrite $60, Volatile Organic Compound (VOC) $120, Full Well Panel (Inorganic/Total Coliform) $120

Call 919-731-1174.

Order a test

If your results show a problem

Waterdrop WHF21-FG whole house water filter

Waterdrop WHF21-FG

If your test finds iron or manganese, this is the whole-house filter we link.

Whole-house filtered water for your family, at every tap.

Waterdrop rates it to reduce iron and manganese.

The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

See the Waterdrop WHF21-FG (affiliate link)

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Wayne County Environmental Health Department Private Water Supply Testing is at Wayne County Environmental Health Department, 134 N John Street, 3rd Floor, Goldsboro.

Wayne County Environmental Health Department Private Water Supply Testing posts $75, other prices posted.

Wayne County Environmental Health Department Private Water Supply Testing tests for Bacteria, E. coli, Nitrate, Inorganic chemical, Pesticides, Petroleum, Volatile organic compounds, Lead, Arsenic, Fluoride.

The county offers an inorganic chemical panel covering arsenic, lead, copper, manganese, iron, fluoride and hardness among others.

Testing from 1998 to 2010 found 60.44 percent of private well samples at or above the limit for iron.

Source: Wayne County Environmental Health Department

Wells

Wayne well samples
Nitrate0 percent of samples10,000 µg/L (MCL/SMCL)
Arsenic0.3 percent of samples10 µg/L (MCL/SMCL)
Lead4.54 percent of samples15 µg/L (MCL/SMCL)
Manganese19.82 percent of samples50 µg/L (MCL/SMCL)
Iron60.44 percent of samples300 µg/L (MCL/SMCL)

NC well contaminants, 1998 to 2010.

These are results from wells that were tested, not a prediction for your well. The only way to know what is in your water is to test it.

How these samples were counted.

Notes

Records

In Wayne County in 2015, 5,788 residents were on private wells, 5 percent of the county's 124,132 residents. Of the county's 11 public water systems, 7 had a violation of some kind, in the three years ending July 9, 2026.

Facts

Radon zone 3.

PFAS

Of 8 public water systems in this aggregation, 5 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.0092 µg/L of PFBA, perfluorobutanoic acid, or 9.2 ng/L. It is not an average or a current tap reading.

This aggregation has 8 PFOA and 11 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

North Carolina tests

Sources

Method. Results. Filters. Bill.