Tap Water Smells Like Bleach: Causes and Fixes
A bleach smell from the tap is chlorine, added by your water utility or by a chlorine treatment in your well.
| Cause | How to tell | Fix |
|---|---|---|
| A sudden smell on city water | It smelled fine last month and smells like a pool this week. | This is not a filter problem. Ask your utility whether it switched to chlorine for a while. The smell ends when it switches back. |
| A steady smell on city water | It has always smelled this way. | An activated carbon filter certified to NSF/ANSI 42 for taste and odor, at the tap you drink from, not on the whole house. |
| Chlorine in a well | The well was just drilled, worked on, or shocked after a bacteria test, or it has a chlorine feeder. | This is not a filter problem. Ask who last treated the well. After a shock, a bacteria test tells you it worked. |
To be sure before you spend, test first. Find the free or low-cost public test in your state, then enter your numbers on our results page to see what each one means and what fixes it.
A sudden smell on city water
When the smell is new, the cause is more likely at the treatment plant than in your pipes. CDC says: "Some utilities switch back and forth between chlorine and chloramine at different times of the year or for other operational reasons." "Water pipes can grow a slimy layer of germs (called a biofilm). This layer helps protect the germs from being killed by disinfectants. Utilities may temporarily switch from chloramine to chlorine disinfection to help remove this slime layer." "Water containing chlorine can taste and smell different than untreated water or water containing chloramine."1
The check. Look for a notice from your utility, or call. EPA says: "If you pay a water bill, the name, address, and telephone number of your supplier should be on the bill."2
A steady smell on city water
Here the amount of chlorine and whatever else is in the water both play a part. CDC says: "Water may have more taste or smell problems when it has higher levels of chlorine or more dirt and other particles in it." "The low levels of disinfectants allowed in tap water do not make people sick."1
The check. Read your utility's yearly water report. CDC says it shows whether there is disinfectant in your water, which kind, the levels of it and of its byproducts, and whether those stayed in a safe range over the past year.1 Here is how to find your utility's report.
The fix. CDC says: "Pitcher filters and filters built into refrigerators often use activated carbon filters. Their main purpose is to improve the taste and smell, rather than the safety, of water."3 Of the NSF standards CDC lists, this is the one to look for on the label: "Standard 42 (taste and odor)".3 Before you filter every tap in the house, know what you give up. CDC says: "Keep in mind that if you install a whole-home filter that removes chlorine or other disinfectants, more germs may grow in your plumbing."3 More free steps that cut the taste are on our chlorine in tap water page, and Chicago's own advice is on Chicago tap water.
If a lab report lists trihalomethanes or haloacetic acids, the chlorine byproducts the chlorine page explains, enter them on the results page linked at the top to see each one next to EPA's limit.
Chlorine in a well
No utility adds chlorine to a private well. Penn State Extension lists the usual times a well gets a strong dose, called shock chlorination:
- "After construction of a new well (many well drillers do this as a standard practice)".4
- "After working on an existing well or installing a new submersible pump".4
- "After receiving a positive water test report for coliform bacteria".4
Some wells get chlorine all the time, to fight slime from iron or sulfur bacteria. Penn State Extension says: "Persistent severe slime issues can be addressed with down-well chlorination using automated pellet droppers."5
The check. Penn State Extension says: "After disinfection of a well, you should retest your water for total coliform bacteria approximately 10 to 14 days later."4 240 public tests we list check for coliform bacteria, and 14 of them are free. 6 public tests we list check for chlorine, and 1 of them is free. The public test link at the top of this page shows which ones serve you and what each costs.
The fix. Protect your equipment during a shock. Penn State Extension says: "Some water treatment equipment can be damaged or exhausted by high chlorine concentrations in water. Contact your water treatment company or equipment manuals to determine if your equipment should be bypassed during shock chlorination."4
Fish, reptiles, and home dialysis
For a few uses, even a low level of chlorine has to come out first. CDC says: "Dialysis centers must treat the water to remove all chemical disinfectants, including chlorine and chloramine, before the water can be used for dialysis. If you do dialysis at home, check your machine's instructions or contact the manufacturer about how to treat water before using it."1
CDC also says not to keep fish, turtles, frogs, or other animals that live in water in tap water with chlorine or chloramine: "Unlike people and other pets, these types of animals absorb water directly into their blood stream. Even low levels of disinfectants can make them sick." "You can buy products at a pet store to remove chlorine or chloramine." "You can also remove chlorine from water by letting it sit out for a few days. You cannot remove chloramine this way, however." "The small amount of chlorine or chloramine utilities add to water will not affect other pets, such as dogs, cats, or birds."1
Sources
- CDC, About Water Disinfection with Chlorine and Chloramine
- EPA, Secondary Drinking Water Standards: Guidance for Nuisance Chemicals
- CDC, About Choosing Home Water Filters
- Penn State Extension, Shock Chlorination of Wells and Springs
- Penn State Extension, Iron and Sulfur Bacteria: a Slimy Problem
Checked November 15, 2026.
