Page updated · Independent public directory · Data checked between October 1, 2026 and November 18, 2026 · Not a government agency · By Bill Dahlstrom

Tarrant County, TX Water Testing: $25

Public test

Fort Worth Water Lead and Copper Testing

Fort Worth Water Department

City water only.

Free lead testing to all locations with an overall service line classification of lead, galvanized-requiring-replacement or unknown.

Request testing online or call 817-392-4477. Lead testing is $25 for non-lead service lines; copper testing is $25 for all locations, or $50 for both tests. Lead testing is waived for Fort Worth Water customers with lead, unknown, or galvanized-requiring-replacement service lines. Confirm eligibility and fees with the lab.

All posted prices. $25 lead or copper, $50 both

Call 817-392-4477.

Order a test

If your results show a problem

Waterdrop G3P600 under-sink reverse osmosis system

Waterdrop G3P600

If your test finds lead, this is the reverse osmosis system we link.

Cleaner, better-tasting drinking water for your family, right at the kitchen sink.

Greatly reduces: lead, PFOA and PFOS, chlorine, fluoride, radium.

Certified under NSF/ANSI 58, IAPMO R&T listing WC-13976, checked November 14, 2026; NSF/ANSI 53, IAPMO R&T listing WC-14805, checked November 14, 2026; NSF/ANSI 42, IAPMO R&T listing WC-14301, checked November 15, 2026.

The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

See the Waterdrop G3P600 (affiliate link)

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Fort Worth Water Lead and Copper Testing is at Fort Worth Water Customer Service, 100 Fort Worth Trail, Fort Worth. Water Customer Service at 817-392-4477 between 7 a.m. and 7 p.m. Monday through Friday, excluding city holidays.

Fort Worth Water Lead and Copper Testing posts $25, other prices posted.

Fort Worth Water Lead and Copper Testing tests for Lead, Copper.

City of Fort Worth water service area, Tarrant County.

In fiscal year 2022, Fort Worth bought 81.8 billion gallons of raw water from the Tarrant Regional Water District to treat for drinking and other uses.

Of the county's 111 public water systems, 7 had a health-based violation.

Source: Request Lead Testing - Fort Worth Water

Source: City of Fort Worth, Fort Worth Water

Records

USGS in 2015 counted 4,893 people on private wells in Tarrant County. That count is under 1 percent of the county's 1,982,498 residents. Systems with a health-based violation served 28,694 people.

Facts

EPA radon zone 3. How this zone is counted.

From October 17, 2021 to October 17, 2026, health-based violations include other rules 17, radionuclides 14, lead and copper 6, coliform 2, and disinfection byproducts 1.

Notes

In 2022, Fort Worth's drinking water came from Lake Worth, Eagle Mountain Lake, Lake Bridgeport, Richland Chambers Reservoir, Cedar Creek Reservoir, Lake Benbrook, and the Clear Fork of the Trinity River.

TCEQ classified the risk to Fort Worth's source waters as high for most contaminants, which means activities near the source make it very likely that chemical constituents may reach the water, and that rating does not mean a health risk is present.

Source: City of Fort Worth, Fort Worth Water

Wells

Single well readings from the state's own groundwater database, not a county survey.

Tarrant well samples
Nitratehighest 114.22 mg/L

Texas groundwater database, varies by county.

These are results from wells that were tested, not a prediction for your well. The only way to know what is in your water is to test it.

How these samples were counted.

PFAS

Of 27 public water systems in this aggregation, 24 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.042 µg/L of PFBA, perfluorobutanoic acid, or 42 ng/L. It is not an average or a current tap reading.

This aggregation has 13 PFOA and 30 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

March 3, 2026 is after EPA's December 2025 monitoring end date. It is printed as recorded, not confirmed as a sample collection date.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

Texas tests

Sources

Method. Results. Filters. Bill.