Page updated · Independent public directory · Data checked between October 2, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Benton County, WA Water Testing: $30

Public test

Benton-Franklin Health District Water Lab Drinking Water Testing

Wells only.

Misses arsenic, lead.

Private well owners in Benton and Franklin Counties, Washington; one-time testing clients must pay in advance.

Pick up a sample container, make payment, and submit your water sample at the Environmental Health Front Desk (2nd Floor) of the Kennewick office; the district's own accredited lab tests it for coliform bacteria, nitrate, fluoride, and hardness.

All posted prices. Total coli/E.coli Present/Absent $30.00, Nitrate $32.00, Fluoride $45.00, Total Coliform/E.coli QTray $40.00, Total Coliform-count (MPN) $70.00, Hardness $25.00, pH $25.00, Chlorine (Residual) $30.00

Call 509-460-4206.

Order a test

If your results show a problem

Waterdrop G3P600 under-sink reverse osmosis system

Waterdrop G3P600

If your test finds arsenic, this is the reverse osmosis system we link.

Cleaner, better-tasting drinking water for your family, right at the kitchen sink.

Greatly reduces: lead, PFOA and PFOS, chlorine, fluoride, radium.

Certified under NSF/ANSI 58, IAPMO R&T listing WC-13976, checked November 14, 2026; NSF/ANSI 53, IAPMO R&T listing WC-14805, checked November 14, 2026; NSF/ANSI 42, IAPMO R&T listing WC-14301, checked November 15, 2026.

Waterdrop rates it to reduce arsenic.

The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

See the Waterdrop G3P600 (affiliate link)

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Benton-Franklin Health District Water Lab Drinking Water Testing is at Benton-Franklin Health District, Kennewick Office (Environmental Health Front Desk, 2nd Floor), 7102 W. Okanogan Place, Kennewick. Laboratory Hours : Monday-Friday, 8:00 a.m. - 5:00 p.m.

Benton-Franklin Health District Water Lab Drinking Water Testing posts $30, other prices posted.

Benton-Franklin Health District Water Lab Drinking Water Testing tests for Bacteria, E. coli, Nitrate, Fluoride, Hardness, pH, Chlorine.

Benton and Franklin Counties, Washington.

A portion of Benton County was designated as part of the Lower Yakima Valley Groundwater Management Area (GWMA), a state designation overseen by the Department of Ecology.

Source: Benton-Franklin Health District: Water Health & Lab Services

Source: Benton County

Records

In 2015, private wells supplied 27,977 people, 15 percent of the county's 190,309 residents. Systems with a health-based violation served 5,512 people. The CDC counted 300 people on community systems with average arsenic above 10 ug/L in 2022. The county's 113 public water systems include 2 with a health-based violation.

Notes

Benton County was completely removed from the Lower Yakima Valley GWMA with the understanding that the County would continue to address groundwater quality issues within the County.

Source: Benton County

Benton County's rural water supply page says recent studies by state and federal agencies have shown that groundwater wells in the Lower Yakima Watershed are in direct hydraulic continuity with the Yakima River.

In Benton County, the Department of Ecology has determined that the Lower Yakima watershed is over-appropriated and has required counties within the watershed to mitigate for groundwater wells placed in the Lower Yakima watershed.

Source: Benton County

Benton County residents enrolled in the health district's WIC or Nurse-Family Partnership programs can get a free countertop reverse osmosis unit or bottled water when their well water shows nitrate at or above 8.0 mg/L.

Source: Benton-Franklin Health District

Facts

EPA radon zone 2. How this zone is counted.

From October 17, 2021 to October 17, 2026, health-based violations include nitrate 26, disinfection byproducts 7, other rules 4, coliform 3, and arsenic 1.

PFAS

Of 6 public water systems in this aggregation, 3 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.017 µg/L of PFOS, perfluorooctanesulfonic acid, or 17 ng/L. It is not an average or a current tap reading.

This aggregation has 4 PFOA and 8 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

Washington tests

Sources

Method. Results. Filters. Bill.