Page updated · Independent public directory · Last reviewed November 16, 2026 · Not a government agency · By Bill Dahlstrom

Total Coliform Test Results: Present or Absent

Drinking water should have no coliform bacteria, so a "present" or "positive" result fails, even at a count of one.1 Until it is fixed, boil water for one minute, or use bottled water, for drinking, cooking, brushing teeth, ice, and baby formula; bathing is fine if children do not swallow the water.2

This week, retest to confirm and ask the lab to check for E. coli, look over the well cap and casing, then disinfect the well with chlorine and test again. If bacteria keep coming back, a well repair or a disinfection system that treats all the water fixes it.

What present means

Most coliform bacteria do not make people sick. They are a warning sign. "Rather, their presence indicates that a contamination pathway exists between a source of bacteria (surface water, septic system, animal waste, etc.) and the water supply."1 If E. coli was also found, the warning is about sewage or manure, and the E. coli page has the steps.

Public water systems are held to a monthly percentage of samples (EPA). A home well has one tap, so present or absent is the line.

Common results

Labs report bacteria two ways. Some give a count per 100 mL. Others give present or absent: "In this case, "present" only indicates that at least one bacterium was present in 100 mL of water."1

Coliform results and what they mean
ResultWhat it means
Absent, or 0 per 100 mLThe result you want. Test again in a year, or after a flood or well work.
Present, E. coli absentBacteria have a way in. Boil or buy drinking water, retest within the week, and again six months later.5
3 colonies per 100 mLA low count. Penn State found shock chlorination worked best in wells under 10 per 100 mL with no E. coli. Disinfect, then retest.4
TNTCToo many to count, usually over 200 per 100 mL. Boil or buy drinking water, and send another sample for an exact count.
ConfluentOther bacteria crowded the plate, so the lab could not read it. Send a new sample.
1,500 per 100 mLToo high for a UV unit alone, which Penn State does not recommend over 1,000 per 100 mL.1

Example results. "TNTC means that the bacteria concentration was so high that it could not be counted (generally higher than 200 colonies per 100 mL)."1 "Confluent means that numerous other non-coliform bacteria grew on the plate, making identification of coliform bacteria impossible. In either case, another sample should be submitted to the laboratory for a more accurate determination."1

Until it is fixed

"Boil for one minute all water to be used for drinking, cooking, washing fruits and vegetables, brushing teeth, and making ice cubes, baby formula and concentrated juices."2 "Use for bathing, but make sure children do not drink water by sucking on washcloths or sponges."2

One exception: "If nitrate or arsenic were also detected in your well water, boiling your water may not be the safest option."3 Use bottled water if your report also shows either one.

The fix

  1. "Submit a second sample to confirm the initial result."2 Ask for an E. coli test on the same sample.
  2. Check the well: a loose or broken cap, cracks in the casing, a casing that ends below ground, or water pooling around it.21
  3. Shock chlorinate the well after repairs. Penn State suggests having a well professional do it.1 Well after a flood has EPA's bleach steps.
  4. "After disinfection of a well, you should retest your water for total coliform bacteria approximately 10 to 14 days later. If no coliform bacteria are present, wait an additional two to three months and have the water tested again. If the bacteria return in either of these subsequent tests, a continuous disinfection treatment system will be necessary."4

"You can use the water again, without boiling, once the well has been disinfected and the water no longer tests positive for coliform bacteria."3

If it keeps coming back

When disinfection does not hold, Minnesota's health department says to work with a licensed well contractor, who may need to clean debris out of the well or build a new one.3 If the cause cannot be fixed, a system that treats all the water entering the house works: a chlorinator, an ultraviolet (UV) light, or ozone.15 "However, UV light units are not recommended for water supplies where total coliform bacteria exceed 1,000 colonies per 100 mL or fecal coliform bacteria exceed 100 colonies per 100 mL."1

New to lab reports? How to read a water test report. Another number on your report? Check it in the results checker.

Sources

  1. Penn State Extension, Coliform Bacteria
  2. Vermont Department of Health, Coliform Bacteria in Drinking Water
  3. Minnesota Department of Health, Bacterial Safety of Well Water
  4. Penn State Extension, Shock Chlorination of Wells and Springs
  5. New Jersey Department of Health, Total Coliform and E. coli in Private Well Drinking Water

Checked November 15, 2026.