Manganese Water Test Results: What Your Number Means
EPA's guideline for manganese is 0.05 mg/L (50 µg/L), for stains and taste (EPA), but the health numbers are higher: the Minnesota Department of Health calls 100 µg/L or less safe for a baby who drinks tap water or formula made with it, and 300 µg/L or less safe when everyone in the house is over one.1 Over those, drink and cook with other water; bathing and showering in it are not a health concern.
This week, if a baby drinks your tap water and your number is over 100 µg/L, switch the baby to bottled water. A water softener or an iron and manganese filter where the water enters the house lowers it everywhere.2
Manganese limits
| Number | What it is |
|---|---|
| 50 µg/L (0.05 mg/L) | EPA's secondary standard, for black stains and taste. Not enforced, and not a health line (EPA). |
| 100 µg/L | "If you have an infant who drinks tap water or drinks formula made with tap water, a safe level of manganese in your water is 100 micrograms of manganese per liter of water (µg/L)* or less."1 |
| 300 µg/L | "If everyone in your household is more than one year old, a safe level of manganese in your water is 300 µg/L or less."1 "The U.S. Environmental Protection Agency has also set a Health Advisory for manganese of 0.3 mg/L."2 |
1 mg/L is 1,000 µg/L. If your lab reports in mg/L, 0.1 is 100 µg/L.
Common results
| Result | What it means |
|---|---|
| 0.02 mg/L (20 µg/L) | Under all three numbers. No manganese treatment needed. |
| 0.08 mg/L (80 µg/L) | Over EPA's 50 µg/L stain guideline, so expect black stains. Under the 100 µg/L Minnesota gives for babies. |
| 0.15 mg/L (150 µg/L) | Too high for a baby who drinks tap water or formula made with it. Use other water for the baby. Fine for everyone over one. |
| 0.3 mg/L (300 µg/L) | At Minnesota's line for people over one and at EPA's health advisory. Plan treatment. |
| 0.6 mg/L (600 µg/L) | Over both health numbers. Use other drinking water for everyone until it is treated. |
Example numbers. EPA limit for public water systems, shown for reference. Private wells are not regulated.
Bathing
"Drinking water with a level of manganese above the MDH guidance level can be harmful for your health, but taking a bath or a shower in it is not."1 Minnesota adds that manganese can stain laundry and leave brown-black or black stains on toilets, tubs, and sinks.1
Fixes
- Water softener. "An MDH study in Dakota County found that water softeners can be an effective way to reduce the level of manganese in drinking water."1
- Greensand filter. For manganese with iron. "They are generally recommended when the combined iron and manganese concentration is in the range of 3 to 10 mg/L."2
The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

This is the whole-house filter we link for manganese. Whole house filter for iron and manganese. Waterdrop WHF21-FG (affiliate link). Waterdrop says "Whole house water filter WHF21-FG adopts iron and manganese reducing filter and GAC filter, five-stage filtration." Waterdrop says it reduces manganese, but we found no independent certification for that.
None of the filters we link is certified for manganese. Look for a filter that NSF, IAPMO R&T, or WQA lists for manganese reduction, and check that listing for the exact model.
Iron on the same report? See iron results. Mixing baby formula? See water for baby formula.
New to lab reports? How to read a water test report. Another number on your report? Check it in the results checker.
Sources
- Minnesota Department of Health, Manganese in Drinking Water
- Penn State Extension, Iron and Manganese in Private Water Systems
Checked November 15, 2026.
