Page updated · Independent public directory · Data checked between October 2, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Harford County, MD Water Testing: $50

Public test

Harford County Health Department Paid Private Well Water Sampling

Wells only.

Misses arsenic.

Private well owners in Harford County, Maryland; available even when sampling is not tied to new well construction or approval for building work.

Call the Harford County Health Department Environmental Health office at 410-877-2300 to schedule a paid water sampling appointment, pay the $50 collection fee to the Health Department, and mail a separate check for the selected tests to the state Laboratories Administration.

All posted prices. A $50.00 collection fee paid to the Health Department, plus a separate lab fee paid to the state Laboratories Administration per test: Bacteriology $41.00, Nitrate-Nitrite $18.00, Turbidity $15.00, Lead $20.00, Copper $20.00, Iron $20.00, Hardness $23.00, Alkalinity $23.00, Chlorides $29.00, regulated metals $20.00 each, and VOCs $50.00

Call 410-877-2300.

Order a test

If your results show a problem

Waterdrop G3P600 under-sink reverse osmosis system

Waterdrop G3P600

If your test finds lead, this is the reverse osmosis system we link.

Cleaner, better-tasting drinking water for your family, right at the kitchen sink.

Greatly reduces: lead, PFOA and PFOS, chlorine, fluoride, radium.

Certified under NSF/ANSI 58, IAPMO R&T listing WC-13976, checked November 14, 2026; NSF/ANSI 53, IAPMO R&T listing WC-14805, checked November 14, 2026; NSF/ANSI 42, IAPMO R&T listing WC-14301, checked November 15, 2026.

The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

See the Waterdrop G3P600 (affiliate link)

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Harford County Health Department Paid Private Well Water Sampling is at Harford County Health Department Environmental Health, 120 S Hays Street, Suite 200, Bel Air.

Harford County Health Department Paid Private Well Water Sampling posts $50, other prices posted.

Harford County Health Department Paid Private Well Water Sampling tests for Bacteria, Nitrate, Turbidity, Lead, Copper, Iron, Hardness, Alkalinity, Chlorides, Voc.

A 1977 Maryland Geological Survey bulletin says wells in the Coastal Plain sand and gravel aquifers in Harford County have the potential to yield more than 500 gallons per minute in many areas, because of the high transmissivity and storage capacity of those aquifers.

Source: Harford County Health Department: Information Regarding Private Well Water Sampling

Source: Maryland Geological Survey

Records

In 2015, private wells supplied 53,183 people, 21 percent of the county's 250,290 residents. Systems with a health-based violation served 19,720 people. The county's 238 public water systems include 1 with a health-based violation.

Notes

A 1977 Maryland Geological Survey bulletin says the most common water-quality problems in Harford County are high concentrations of iron and a low pH.

A 1977 Maryland Geological Survey bulletin says manganese concentration is high in a few areas of the Coastal Plain in Harford County, as is nitrate in a few areas of the Piedmont.

A 1977 Maryland Geological Survey bulletin says well yields in the Piedmont aquifers of Harford County are extremely variable, ranging from zero to more than 50 gallons per minute in most of the aquifers. The Cockeysville Marble probably has the potential to yield more than 200 gallons per minute, but it has a small outcrop area.

Source: Maryland Geological Survey

Facts

Health-based violations from October 17, 2021 to October 17, 2026 include other rules 23, lead and copper 12, nitrate 4, and coliform 1.

Radon zone 1.

PFAS

Of 5 public water systems in this aggregation, 2 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.0105 µg/L of PFPeA, perfluoropentanoic acid, or 10.5 ng/L. It is not an average or a current tap reading.

This aggregation has 4 PFOA and 5 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

Maryland tests

Sources

Method. Results. Filters. Bill.