Page updated · Independent public directory · Data checked between October 11, 2026 and November 16, 2026 · Not a government agency · By Bill Dahlstrom

Howard County MD Well Water Testing: Columbia, Ellicott City

Public test

Howard County Health Department Well Water Sample Collection

Wells only.

Misses arsenic, lead.

Howard County Health Department, Bureau of Environmental Health tests here but posts no price.

Owners of established private wells in Howard County, Maryland.

Contact the Howard County Health Department at 410-313-1773 to arrange sample collection; staff collect the sample and send it to the Maryland Department of Health (MDH) Laboratory for bacteria and nitrate analysis.

Tests:
Bacteria, Nitrate
Address:
  • Howard County Health Department, Columbia.

Call 410-313-1773.

Official page

If your results show a problem

None of the filters we link is certified for nitrate. Look for a reverse osmosis unit certified to NSF/ANSI 58 for nitrate, and check the certifier's own listing for that model.

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Howard County Health Department in Columbia comes out to sample an established private well anywhere in the county, Ellicott City included. It charges nothing to collect the sample, but the state lab often charges for the test.

In and around the Baltimore Gneiss rock formation, about 19 percent of wells tested through 2019 were over the drinking water standard for gross alpha, mostly from radium. The county's homeowner guide, revised in 2018, says the first test for an existing home in the mapped area is free. It names ion exchange, lime softening, and reverse osmosis as the treatments for radium.

Public water in Howard County comes from Baltimore City, except in North Laurel east of I-95 and south of Patuxent Range Road, where it comes from WSSC.

Source: Howard County Health Department

Source: Howard County Health Department, radionuclides guide

Source: Howard County Bureau of Utilities

PFAS

The highest single result for these systems is 0.0221 µg/L of PFPeA, perfluoropentanoic acid, or 22.1 ng/L. It is not an average or a current tap reading.

This aggregation has 2 PFOA and 0 PFOS analytical results at or above 0.004 µg/L, or 4 ng/L. In drinking water, that equals the 4.0 ppt maximum contaminant level EPA set for each on April 10, 2024. One sample can count in both.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Notes

Records

In 2015, private wells supplied 66,244 people, 21 percent of the county's 313,414 residents. Systems with a health-based violation served 3,161 people. Of the county's 88 public water systems, 1 had a health-based violation.

Facts

EPA radon zone 1. How this zone is counted.

From October 17, 2021 to October 17, 2026, health-based violations include other rules 10, nitrate 3, and coliform 1.

Nearby

Maryland tests

Sources

Method. Results. Filters. Bill.