Page updated · Independent public directory · Data checked between October 2, 2026 and November 14, 2026 · Not a government agency · By Bill Dahlstrom

Olmsted County, MN Water Testing: $25

Public test

Southeastern Minnesota Water Analysis Laboratory (SEMWAL)

Wells only.

Open to individuals in Minnesota; test kits can be picked up at the Olmsted County Public Health Building or ordered online.

Pick up a test kit at Olmsted County Public Health Building at 2100 Campus Drive SE, Rochester, or purchase a water test online; return the labeled sample on an ice pack with the completed test request form so it arrives at the lab within 28 hours of collection.

All posted prices. $25.00 Bacteria (Presence/Absence Total Coliform & E. Coli); $28.00 Quantified Bacteria (Total Coliform & E. Coli); $28.00 Nitrate, Nitrite, Fluoride, Chloride, Sulfate; $35.00 Calcium, Magnesium, Sodium; $28.00 Lead; $28.00 Arsenic; $28.00 Manganese; $28.00 Iron; $35.00 Hardness Test.

Call 507-328-7495.

Order a test

If your results show a problem

None of the filters we link is certified for nitrate. Look for a reverse osmosis unit certified to NSF/ANSI 58 for nitrate, and check the certifier's own listing for that model.

When your results come back, enter them on our results page. We show what each number means and what fixes it. If cost is a worry, see help paying for water treatment.

Southeastern Minnesota Water Analysis Laboratory (SEMWAL) is at Olmsted County Public Health Building, 2100 Campus Drive SE, Rochester. Monday-Wednesday 8 a.m.-4:30 p.m. or Thursday by noon for sample drop-off.

Southeastern Minnesota Water Analysis Laboratory (SEMWAL) posts $25, other prices posted.

Southeastern Minnesota Water Analysis Laboratory (SEMWAL) tests for Bacteria, E. coli, Nitrate, Fluoride, Lead, Arsenic, Manganese, Iron, Hardness.

Olmsted County's laboratory has provided drinking water and surface water analysis for southeastern Minnesota since 1983.

In the final report, 1.7 percent of private well samples were at or above the limit for nitrate.

Source: Olmsted County Public Health

Wells

Olmsted well samples
Nitrate1.7 percent of samples, 923 samples, highest 32 mg/L, average 1.8 mg/Lnitrate HRL of 10 mg/L

Minnesota nitrate reports, final report, years not labeled in extracted header.

These are results from wells that were tested, not a prediction for your well. The only way to know what is in your water is to test it.

How these samples were counted.

Notes

Rochester pumps its water from 31 deep groundwater wells, and most of that water comes from the Jordan Aquifer.

Rochester's water has 17 grains of hardness per gallon, or 280 parts per million.

Source: Rochester Public Utilities

Records

In Olmsted County in 2015, 20,826 residents were on private wells, 14 percent of the county's 151,436 residents. Systems with a health-based violation served 75 people. The county's 84 public water systems include 1 with a health-based violation.

Facts

Health-based violations from October 17, 2021 to October 17, 2026 include nitrate 5 and other rules 1.

Radon zone 1.

PFAS

Of 3 public water systems in this aggregation, 1 reported a PFAS result at or above the study reporting level.

The highest single result for these systems is 0.0039 µg/L of PFHxS, perfluorohexanesulfonic acid, or 3.9 ng/L. It is not an average or a current tap reading.

A detection is not a tap reading for every home. Private wells were not monitored. EPA says these results do not show compliance or noncompliance.

How this PFAS count was made.

Nearby

Minnesota tests

Sources

Method. Results. Filters. Bill.