Page updated · Independent public directory · Last reviewed November 16, 2026 · Not a government agency · By Bill Dahlstrom

Water Hardness Test Results: Soft to Very Hard

Hardness has no EPA health limit; USGS calls water over 180 mg/L as calcium carbonate (about 10.5 grains per gallon) very hard, and 121 to 180 mg/L hard (USGS). Hard water is safe to drink, cook with, and bathe in; it leaves scale, white spots, and soap film, and the fix is a water softener if those bother you.1

Nothing needs to happen this week. If you are thinking about a softener, get an independent hardness test first and soften only the water that needs it.

The scale

mg/L as calcium carbonateGrains per gallonUSGS class
0 to 600 to 3.5Soft
61 to 1203.6 to 7.0Moderately hard
121 to 1807.1 to 10.5Hard
Over 180Over 10.5Very hard

Classes from USGS. "A gpg is used exclusively as a hardness unit and equals approximately 17 mg/l or ppm."1 We divide by 17.118, the exact factor, so our numbers can differ from a rounded chart by a little. The Rhode Island Department of Health notes that a report may show calcium hardness, or calcium on its own line, instead of total hardness.2

Common results

Hardness results and what they mean
ResultWhat it means
40 mg/L (2.3 gpg)Soft. No softener needed.
100 mg/L (5.8 gpg)Moderately hard. Under 7 gpg, so Penn State says major scale and soap film are unlikely.
150 mg/L (8.8 gpg)Hard. Over 7 gpg. You may see white spots and scale in the kettle; a softener is a choice, not a need.
10 gpg (171 mg/L)Very hard. Penn State says scale like this can shorten a water heater's life and leave soap film in tubs and appliances.
250 mg/L (14.6 gpg)Very hard. Same as above, and a softener will add sodium, about 7.5 mg per quart for each gpg it removes.

Example numbers.

Health

"From a health standpoint, these minerals have no adverse effects and are, in fact, essential daily nutrients."1 For what help programs do and do not cover, see help paying for water treatment.

Softener or not

  • "You can live with the hardness level, recognizing that levels below 7.0 gpg will probably not cause major scaling and soap film, or treat the water to reduce the calcium and magnesium present."1
  • "Although many water softening companies offer free hardness testing, it's best to have a third-party evaluation."1
  • "The exchange of hardness minerals for sodium adds 7.5 milligrams per quart for each gpg of hardness removed."1
  • "Showers, sinks, and laundry hookups probably should be softened; toilets, outside spigots, and basement sinks can be bypassed."1

For what hard water does to fixtures and the water heater, see white spots and crust from hard water. To compare a softener with other treatment, see which water filter fixes what.

New to lab reports? How to read a water test report. Another number on your report? Check it in the results checker.

Sources

  1. Penn State Extension, Water Softening
  2. Rhode Island Department of Health, Reading Your Water Analysis Report

Checked November 15, 2026.