Page updated · Independent public directory · Last reviewed November 16, 2026 · Not a government agency · By Bill Dahlstrom

White Spots and Crust from Hard Water

White crust, spots, and scale are usually hard water: calcium and magnesium left behind when water dries or heats.

Causes and fixes
CauseHow to tellFix
Hard waterSpots on glasses, soap film on your skin, scale in the kettle and water heater.A water softener removes the minerals. You might need one when hardness tests over 120 mg/L (7 grains per gallon).
High pHA slippery feel or a soda taste, with deposits.Test pH along with hardness before you buy a softener.
Total dissolved solidsDeposits with a salty taste, colored water, or staining.Test total dissolved solids along with hardness before you buy a softener.

To be sure before you spend, test first. Find the free or low-cost public test in your state, then enter your numbers on our results page to see what each one means and what fixes it.

Spots on glasses and film on skin

Hard water is a cleaning and appliance problem, not a health one. Penn State Extension says of calcium and magnesium: "From a health standpoint, these minerals have no adverse effects and are, in fact, essential daily nutrients."1 USGS says: "One of the most common causes of cloudy dishes and glassware is hard water." "Depending on the hardness of your water, after using soap to wash you may have felt like there was a film of residue left on your hands."2

Scale in the kettle and water heater

Heat is what makes the hard deposits. USGS says: "When hard water is heated, such as in a home water heater, solid deposits of calcium carbonate can form." "As the image of the inside of a water-supply pipe shows, long-term movement of hard water through a pipe can result in what is called scale buildup."2

Crust that is not hardness

Two other readings leave deposits too, so a hardness test alone can miss the cause. In its table of secondary standards, EPA lists these effects for high pH: "high pH: slippery feel; soda taste; deposits".3 And for total dissolved solids: "hardness; deposits; colored water; staining; salty taste".3

The test

On city water. The Minnesota Department of Health says: "If you get your water from a community water system, you can contact them directly for information about your water’s hardness."4

On a well. Hardness in well water holds steady, so one good number lasts. USGS says: "Major-ion chemistry in groundwater is relatively stable and generally does not change over time."2 60 public tests we list check for hardness, and 3 of them are free. The public test link at the top of this page shows which ones serve you and what each costs. Be wary of a test from someone selling softeners. Penn State Extension says: "Although many water softening companies offer free hardness testing, it's best to have a third-party evaluation."1

The test list shown here does not name hardness, so check the kit page before you order.

To see where your number falls, from soft to very hard, read water hardness test results.

The fix

This is what the results tool shows for a high hardness number:

  • Whole-house filter or softener. A water softener removes calcium and magnesium, the minerals that make water hard. Over 120 mg/L (7 grains per gallon), one can help your appliances and the taste or look of your water. (Minnesota Department of Health)

Before you buy, the Minnesota Department of Health advises:

  • "Soft water provided by a utility does not need additional softening and may cause corrosion issues for your home."4
  • "Toilets, hose bibs, basement sinks, and other cold water taps typically do not need to be connected to a softener. In many cases, people choose to soften only the hot water."4
  • "Make sure the softener is set to the hardness of your water supply."4
  • "Have an un-softened tap for cooking and drinking."4
  • "Regenerate your softener with potassium chloride instead of sodium chloride (salt)."4

Penn State Extension adds: "It is also important to note that water softeners will not necessarily remove any of the more serious drinking water contamination problems."1 If you also see blue-green stains, read blue-green stains before you add a softener.

Sources

  1. Penn State Extension, Water Softening
  2. USGS, Hardness of Water
  3. EPA, Secondary Drinking Water Standards: Guidance for Nuisance Chemicals
  4. Minnesota Department of Health, Home Water Softening Frequently Asked Questions

Checked November 15, 2026.