Page updated · Independent public directory · Last reviewed November 16, 2026 · Not a government agency · By Bill Dahlstrom

Brown or Orange Water: Iron, Manganese, and Rust

Orange or brown water and stains are iron, and black or dark brown ones are manganese.

Causes and fixes
CauseHow to tellFix
Clear-water ironComes out clear, then turns red or brown in a glass.A water softener or an iron filter, such as manganese greensand, on all the water entering the house.
Red-water ironRed or yellow as it leaves the tap.An iron filter, such as manganese greensand. Over about 10 mg/L, aeration or a chlorine feed, then a filter.
Iron bacteriaOrange or yellow jelly-like slime in the toilet tank.A filter alone will not fix it. Kill the bacteria with chlorine first, then filter.
ManganeseBlack or dark brown stains and a bitter metallic taste.A water softener can reduce it.
Rust from pipes or the well casingIron or steel pipes or casing, sometimes with blue-green stains too.Stop the corrosion. Our blue-green stains page covers that fix.

To be sure before you spend, test first. Find the free or low-cost public test in your state, then enter your numbers on our results page to see what each one means and what fixes it.

Rusty iron in the water

The Minnesota Department of Health explains the stain: "Similar to how iron in a metal pail turns to rust when exposed to water and oxygen, iron minerals in water turn to rust and stain plumbing fixtures and laundry." "Iron in water does not usually present a health risk."1 It comes in two forms you can tell apart at the tap:

  • "Ferrous iron (“clear-water iron”): Water comes out of the faucet clear, but turns red or brown after standing."1
  • "Ferric iron (“red-water iron”): Water is red or yellow when it first comes out of the faucet."1

The check. Fill a clear glass, look, and look again after it sits. Then get a number. Minnesota says: "In addition to testing for iron, it can be helpful to test for hardness, pH, alkalinity, and iron bacteria."1 61 public tests we list check for iron, and 5 of them are free. The public test link at the top of this page shows which ones serve you and what each costs.

The test lists shown here do not name iron or manganese, so check the kit page before you order.

The fix. This is what the results tool shows for a high iron number:

  • Whole-house filter or softener. A water softener or an iron filter (such as manganese greensand) removes clear-water iron. Iron filters are common for red-water iron up to 10 to 15 mg/L. (Minnesota Department of Health)
  • A water treatment specialist can help match the treatment to your water. (Minnesota Department of Health)

For iron over about 10 mg/L, Minnesota adds: "Aeration (injecting air) or chemical oxidation (usually adding chlorine in the form of calcium or sodium hypochlorite) followed by filtration are options if iron levels are more than 10 mg/L."1 On a well, there is one more reason to treat it: "Some harmful organisms require iron to grow. If there is iron in the water, it may be harder to get rid of harmful bacteria."1 For what each iron number means, see iron water test results.

Orange slime in the toilet tank

Lift the tank lid. NDSU Extension describes what iron bacteria look like: "You may find this reddish-brown or sometimes yellow, jellylike growth on the surface of the water in the toilet flush tank or oozing from leaky pipes."2 Penn State Extension says: "Iron bacteria use dissolved iron or manganese in groundwater to grow, producing a bacterial slime along the way. While these bacteria can be off-putting, they are typically considered more of a nuisance than a health hazard." "Even iron concentrations as low as 0.01 mg/L can be enough for these bacteria to grow." "While some iron bacteria may occur naturally in groundwater, more often they are introduced into water wells during well construction or maintenance."3

The check. You may not need a lab for the bacteria themselves. Penn State Extension says: "In fact, few labs actually test for iron or sulfur bacteria because there are no health implications or drinking water standards." "Testing well water for iron and manganese can provide information on the presence of these metals, which could help confirm the likelihood of iron bacteria if aesthetic symptoms are also found."3

The fix. NDSU Extension says: "Iron bacteria can not be treated by most common water filtration methods and can cause fouling in water treatment equipment." "To treat this problem you must first kill the bacteria by chlorination or some other oxidizing-disinfecting method and then filter it out of the water."2 Our bleach smell guide covers what to expect from a chlorinated well.

Black or dark brown stains

For manganese, EPA's secondary standards list these effects: "black to brown color; black staining; bitter metallic taste".4 EPA's secondary guideline is 0.05 mg/L, and it does not enforce it (EPA). Manganese also has a health number. Penn State Extension says: "The U.S. Environmental Protection Agency has also set a Health Advisory for manganese of 0.3 mg/L."5 For a baby, the Minnesota Department of Health says: "If you have an infant who drinks tap water or drinks formula made with tap water, a safe level of manganese in your water is 100 micrograms of manganese per liter of water".6

The check. 46 public tests we list check for manganese, and 4 of them are free. The same search finds them. If a baby drinks the water or formula made with it, read water for baby formula while you wait.

The fix. This is what the results tool shows for a high manganese number:

For what each manganese number means, see manganese water test results.

Rust from pipes or the well casing

Not all iron starts in the ground. Minnesota says: "In some cases, iron can also result from corrosion of iron or steel well casing or water pipes."1 EPA says corrosion leaves its own colors: "Other effects of corrosive water, such as the corrosion of iron and copper, may stain household fixtures and impart objectionable metallic taste and red or blue-green color to the water supply."4

Whole-house treatment

EPA's guideline for iron is 0.3 mg/L, set for taste, color, and stains (EPA). Penn State Extension says: "Since iron and manganese are aesthetic problems that affect all potential uses of the water, they must be removed from all water entering the home using Point-of-Entry (POE) treatment devices."5

The small commission from purchases made through this link helps keep this free public directory open, at no extra cost to you.

Waterdrop WHF21-FG whole house water filter

If your result is over, this is the iron and manganese filter we link. Whole house filter for iron and manganese. Waterdrop WHF21-FG (affiliate link). Waterdrop says "Whole house water filter WHF21-FG adopts iron and manganese reducing filter and GAC filter, five-stage filtration." Waterdrop says it reduces iron and manganese, but we found no independent certification for that.

Sources

  1. Minnesota Department of Health, Iron in Well Water
  2. NDSU Extension, Reddish-brown slime on fixtures
  3. Penn State Extension, Iron and Sulfur Bacteria: a Slimy Problem
  4. EPA, Secondary Drinking Water Standards: Guidance for Nuisance Chemicals
  5. Penn State Extension, Iron and Manganese in Private Water Systems
  6. Minnesota Department of Health, Manganese in Drinking Water

Checked November 15, 2026.